DIFFERENTIAL PRESSURE TRANSMITTER – YOKOGAWA – Model: EJA110E-JMS5J-81DEJ

SKU: 1-1-2-A10044-3

DIFFERENTIAL PRESSURE TRANSMITTER
Model: EJA110E
Accuracy: 0.055%
Supply voltage: Exi: 10.5 … 30 VDC, 2-wire
Supply voltage:Exd and Non-Ex: 10,5 … 42 VDC 2-wire
Max. over pressure: 160 bar
Process temperature limits: -40 … +120°C
Output signal: 4 to 20 mA DC with HART7 protocol
Measurement span: 10 to 1000 mbar
Material process flange: stainless steel 316
Material capsule: stainless steel 316L
Matieral diaphragm: Hastelloy C-276
Process connection: without (1/4″ NPT female in cover flange)
Material bolts and nuts: B7 carbon steel
Installation: horizontal impulse piping, right side high pressure
Amplifier housing: cast aluminium alloy
Degree of protection: IP66/67
Electrical connection: 2x M20x1.5 entry, 1x blind plug (316 SST)
Integral indicator: digital indicator with the range setting switch
Mounting brackets: 316 SST, 2″ pipe mounting flat type

€1.345,00

In Stock
Send an inquiry
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Reviews

There are no reviews yet.

Be the first to review “DIFFERENTIAL PRESSURE TRANSMITTER – YOKOGAWA – Model: EJA110E-JMS5J-81DEJ”

Your email address will not be published.

Related products

  • Pressure Transmitter – ENDRESS HAUSER – Model: PMP55

    Process transmitter
    Part Number : PMP55-AA11JA1KGBARJA1A
    Output signal: 4-20mA – Non-hazardous area
    Range : 0…2 bar gauge
    Connection Size: NPS 2″ Cl.300 RF, 316/316L flange ASME B16.5
    Electrical Connection: Gland M20

    (0 reviews)
    €83,00
    Send an inquiry

  • PRESSURE TRANSMITTER – ENDRESS+HAUSER – MODEL: PMP55

    Part No.: PMP55-BA31JA1PGJAFJA1A+AAKE
    Approval: ATEX II1/2G Ex ia IIC T6 Ga/Gb
    Output: PROFIBUS PA
    Display, Operation: LCD, push button on display/electronics
    Housing: F31 Alu, glass window
    Electrical Connection: Gland M20, IP66/68 NEMA4X/6P
    Sensor Range: 10bar/1MPa/150psi gauge, 100mH2O/333ftH2O/4000inH2O overload: 40bar/4MPa/600psi
    Reference Accuracy: Standard
    Calibration; Unit: Customised pressure; see additional spec.
    Process Connection: NPS 2″ Cl.150 RF, 316/316L flange ASME B16.5
    Membrane Material: 316L
    Fill Fluid: Silicone oil
    Diaphragm Seal Connection: Direct
    Additional Operation Language:English
    Test, Certificate: Pressure test, internal procedure, inspection certificate

    (0 reviews)
    €175,00
    Send an inquiry

  • Pressure Transmitter – ABB – Model: 266GST

    Process Transmitter
    Part Number :266GST-FSBNB1L1
    Output signal: HART digital communication and 4 to 20 mA
    Housing : Aluminum alloy
    Non-hazardous area – With integral LCD display
    Sensor Span Limits : 0.4 and 40 kPa (4 and 400 mbar, 1.6 and 160 inH2O)
    Connection Size :1/2 in -14 NPT female
    Electrical Connection: M20 x 1.5

    (0 reviews)
    €1.315,70
    Send an inquiry

  • Pressure Transmitter – ENDRESS HAUSER – Model: PMP71

    Process transmitter
    Part Number : PMP71-5AA1U11RDAAA
    Output signal: 4-20mA HART; extern + LCD / ATEX II 2G Ex db IIC T6 Gb
    Range : 0…100 bar gauge
    Connection Size: Thread ANSI MNPT1/2 hole, 316L
    Electrical Connection: Gland M20

    (0 reviews)
    €96,00
    Send an inquiry