Awaiting product image

Pressure Transmitter – ENDRESS+HAUSER – Model: PMP75

SKU: 1-1-2-A10042-3

Part No.: PMP75-5A11PB1AFABA
Approval: ATEX II 2G Ex d IIC T6 Gb
Output; Operating: 4-20mA HART; extern + LCD
Housing; Cover Sealing; Cable Entry: T14 316L IP66/67 NEMA6P; EPDM;M20 gland, T14 = side cover (Ex d > M20 thread)
Sensor Range; Sensor Overload Limit: 10bar/1MPa/150psi gauge; 40bar/4MPa/600psi
Membrane Material: 316L
Process Connection: NPS 2″ Cl.150 RF, 316/316L, flush mount flange ASME B16.5
Transmitter Mounting; Fill Fluid:Direct; silicone oil
Additional Option 1: 3.1 Material certificate, wetted metallic parts, EN10204-3.1 inspection certificate
Additional Option 2: Not selected

€239,00

In Stock
Send an inquiry
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Reviews

There are no reviews yet.

Be the first to review “Pressure Transmitter – ENDRESS+HAUSER – Model: PMP75”

Your email address will not be published.

Related products

  • Pressure Transmitter – ABB – Model: 266GST

    Process Transmitter
    Part Number :266GST-FSBNB1L1
    Output signal: HART digital communication and 4 to 20 mA
    Housing : Aluminum alloy
    Non-hazardous area – With integral LCD display
    Sensor Span Limits : 0.4 and 40 kPa (4 and 400 mbar, 1.6 and 160 inH2O)
    Connection Size :1/2 in -14 NPT female
    Electrical Connection: M20 x 1.5

    (0 reviews)
    €1.315,70
    Send an inquiry

  • PRESSURE TRANSMITTER – ENDRESS+HAUSER – MODEL: PMP55

    Part No.: PMP55-BA31JA1PGJAFJA1A+AAKE
    Approval: ATEX II1/2G Ex ia IIC T6 Ga/Gb
    Output: PROFIBUS PA
    Display, Operation: LCD, push button on display/electronics
    Housing: F31 Alu, glass window
    Electrical Connection: Gland M20, IP66/68 NEMA4X/6P
    Sensor Range: 10bar/1MPa/150psi gauge, 100mH2O/333ftH2O/4000inH2O overload: 40bar/4MPa/600psi
    Reference Accuracy: Standard
    Calibration; Unit: Customised pressure; see additional spec.
    Process Connection: NPS 2″ Cl.150 RF, 316/316L flange ASME B16.5
    Membrane Material: 316L
    Fill Fluid: Silicone oil
    Diaphragm Seal Connection: Direct
    Additional Operation Language:English
    Test, Certificate: Pressure test, internal procedure, inspection certificate

    (0 reviews)
    €175,00
    Send an inquiry

  • Pressure Transmitter – YOKOGAWA – Model: EJA430E-JAS5J-81DEJ

    GAUGE PRESSURE TRANSMITTER
    Model: EJA430E
    Accuracy: 0.055%
    Supply voltage: Exi: 10.5 … 30 VDC, 2-wire
    Supply voltage: Exd and Non-Ex: 10.5 … 42 VDC 2-wire
    Max. over pressure: 160 bar
    Process temperature limits: -40 … +120°C
    Output signal: 4 to 20 mA DC with HART7 prototocol
    Measurement span: 0.3 to 35 bar
    Material process connector: stainless steel 316L
    Matieral diaphragm: Hastelloy C-276
    Process connection: without (1/4″ NPT female on the cover flanges)
    Material bolts and nuts: B7 carbon steel
    Installation: horizontal impulse piping, right side high pressure
    Amplifier housing: cast aluminium alloy
    Degree of protection: IP66/67
    Electrical connection: 2x M20x1.5 entry, 1x blind plug (316 SST)
    Integral indicator: digital indicator with the range setting switch
    Mounting brackets: 316 SST, 2″ pipe mounting flat type

    (0 reviews)
    €1.230,00
    Send an inquiry

  • Pressure Transmitter – ROSEMOUNT – Model: 3051T

    In-line pressure transmitter
    Part Number :3051T A3A2B21BI1
    Output signal: 4–20 mA with digital signal based on HART® Protocol
    Range : 0 to 30 psia (0 to 2,06 bar)
    Connection Size: 1/2–14 NPT female
    Electrical Connection: Gland M20X1.5 / ATEX Intrinsic Safety and Dust

    (0 reviews)
    €833,67
    Send an inquiry